ADM485: 5 V Low Power EIA RS-485 Transceiver
![ADM485: 5 V Low Power EIA RS-485 Transceiver](https://gr.pcbelectronics.com/upload/topics/20190311/L9duneR176WNIti4C4mFsgN6HD1ALjguhgftrh7B.png)
The ADM485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with EIA standards RS-485 and RS-422. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver can be enabled independently. When disabled, the outputs are three-stated.
The ADM485 operates from a single 5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. If during fault conditions, a significant temperature increase is detected in the internal driver circuitry, this feature forces the driver output into a high impedance state.
Up to 32 transceivers can be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important, therefore, that the remaining disabled drivers do not load the bus. To ensure this, the ADM485 driver features high output impedance when disabled and when powered down, which minimizes the loading effect when the transceiver is not being used. The high impedance driver output is maintained over the common-mode voltage range of −7 V to +12 V.
The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).
The ADM485 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up.
The ADM485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at data rates up to 5 Mbps while low skew minimizes EMI interference.
The part is fully specified over the commercial and industrial temperature range and is available in 8-lead PDIP, 8-lead SOIC, and small footprint, 8-lead MSOP packages.
Features
|
Applications
|
Εικόνα | Μέρος # | Κατασκευαστής | Περιγραφή | Στοκ | Τιμή | Αγορά |
---|---|---|---|---|---|---|
|
Walsin
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT 0603 MLCC NPO 150 pF +/- 1% 100 V T&R MT
|
0
|
|
Λεπτομέρεια | |
|
KEMET Electronics
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT 50V 0.15uF U2J 1206 20% AEC-Q200
|
0
|
|
Λεπτομέρεια | |
|
Johanson Dielectrics
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT 200V 270pF 0805 5%
|
0
|
|
Λεπτομέρεια | |
|
KEMET Electronics
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT 100V 3300pF X7R 1206 20%
|
0
|
|
Λεπτομέρεια | |
|
Kyocera AVX
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT R102 HIGH V
|
0
|
|
Λεπτομέρεια | |
|
Vishay / Vitramon
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT 0603 6.8pF 100volts C0G +/-0.1pF
|
0
|
|
Λεπτομέρεια | |
|
Walsin
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT 0402 MLCC NPO 82 pF +/- 10% 10 V T&R GP
|
0
|
|
Λεπτομέρεια | |
|
KEMET Electronics
|
Multilayer Ceramic Capacitors MLCC - SMD/SMT 200V 3900pF X7R 1206 20% AEC-Q200
|
0
|
|
Λεπτομέρεια |