LOG114 is a precision high speed logarithmic amplifier with 2.5V reference and non-dedicated output op amp

The LOG114 is designed for measuring low level and wide dynamic range currents in communication, laser, medical and industrial systems. The device calculates the logarithm or logarithmic ratio of an input current or voltage relative to a reference current

INA301 is a 36V, 550kHz, 4V/μs, high precision current sense amplifier with comparator

The INA301 includes a high common mode current sense amplifier and a high speed comparator configured to detect overcurrent conditions by measuring the voltage developed across the current sense or shunt resistor and comparing this voltage to a defined th

TPS92314A is a high current offline primary side sensing controller with PFC in 8-SOIC

The TPS92314A is an offline controller specifically designed to drive high power LEDs for lighting applications. Features include adaptive constant on-time control and quasi-resonant switching. Resonant switching reduces EMI signatures and improves system

IWR1443 is a single-chip 76GHz to 81GHz mmWave sensor with integrated MCU and hardware accelerator

The IWR1443 device is an integrated single-chip mmWave sensor based on FMCW radar technology capable of operating in the 76 to 81 GHz frequency band with continuous chirp up to 4 GHz. Fabricated on TI's low-power 45-nm RFCMOS process, the solution ena

DRV135 is an audio balanced line driver available in SOIC-8

The DRV134 and DRV135 are differential output amplifiers that convert a single-ended input into a balanced output pair. These ADS5272IPFPT balanced audio drivers consist of high performance op amps with on-chip precision resistors. They are fully suited f

The TRF1208 is a 10MHz to 11GHz, 3dB bandwidth, single-ended to differential amplifier

The TRF1208 is an AD7940BRJZ-REEL7 high performance RF amplifier optimized for radio frequency (RF) applications. This device is ideal for AC-coupled applications that require single-ended to differential conversion when driving analog-to-digital converte

AMC60304 is a quad-channel EML monitor and controller with 200mA IDAC and multi-channel ADC

The AMC60304 is a highly integrated low power analog AD260AND-3 monitor and controller optimized for high current output. The device includes four 12-bit current output digital-to-analog converters (IDACs), a 12-bit, 1MSPS analog-to-digital converter (ADC

L5980 0.7A Buck Switching Regulator

feature0.7A DC output current2.9 V to 18 V input voltageOutput Voltage Adjustable from 0.6 V250 kHz switching frequency, programmable up to 1 MHzInternal soft-start and inhibitLow dropout operation: 100% duty cyclevoltage feedforwardNo-load current operat

The OPA2172 is a dual, 36V, 10MHz, low power operational amplifier

The OPA172, OPA2172 and OPA4172 (OPA172) are a family of 36V, single supply, low noise operational amplifiers capable of operating from +4.5V (±2.25V) to +36V supplies (±18 V). The latest addition of high voltage CMOS op amps, along with the

The OPA455 is a 150V, wide bandwidth 6.5MHz, high slew rate 32V/μs unity gain stable operational amplifier

The OPA455 is a high-voltage (150-V), high-current drive (45-mA), ADS5273IPFP unity-gain stable operational amplifier with a gain-bandwidth product of 6.5 MHz and a slew rate of 32 V/us. Due to the wide output range of the amplifier, the device is an exce

The ONET8551T is an 11.3-Gbps limiting transimpedance amplifier with RSSI

The ONET8551T device is an AD9238BST-20 high speed, high gain, limiting transimpedance amplifier for optical receivers at data rates up to 11.3 Gbps. It features low input-referred noise, 9GHz bandwidth, 10kΩ small-signal transimpedance, and a recei

AoX Bluetooth direction finding technology has a bright future

The direction measurement positioning of Bluetooth AoX is different from the previous positioning based on Bluetooth beacons or RSSI. The positioning accuracy based on Bluetooth beacons or RSSI is not very high (although it is also meter-level positioning

The MAX25208 is a versatile automotive 60V/70V 2.2MHz step-down controller with 7 μIQs and selectable bypass mode

The MAX25206/MAX25207/MAX25208 are automotive 2.2MHz synchronous step-down controller ICs with 7 μIQs. The IC's input voltage range is 3.5V to 60V (MAX25206/7) and 70V (MAX25208). They can operate at 99% (typ) duty cycle to exit state. These contro

The OPA2377 is a low cost, low noise, 5MHz CMOS operational amplifier

The OPA377 family of operational amplifiers are wide bandwidth CMOS amplifiers that provide very low noise, low input bias current, and low offset voltage while operating at a low quiescent current of 0.76mA (typ).The OPA377 op amp is optimized for low-vo

Mediatek reveals 5G smartphone chips

Dimensity 920 includes hardware-based 4K HDR video capture, supporting up to four concurrent cameras and sensors up to 108Mpixel, and the company is claiming a 9% boost in gaming performance compared to its Dimensity 900 predecessor. An octa-core Arm Cort

Kioxia speeds and slims its 3D UFS flash memories

Aimed at mobile applications, its ‘universal flash storage’ (UFS) version 3.1 devices improve performance by 30% for random read and 40% for random write, making them faster than their predecessors, according to the company, which added that,

Intel has new roadmap, but can it stay on course?

Intel’s unveiling earlier this week of a multi-year processing and packaging technology roadmap that leverages several new technology innovations was a bold declaration that the company is aiming to regain its edge and doesn’t intend to yield

Micron brings 176-layer NAND to smartphones

Downloading a 4K movie to a smartphone is something no one would have tried a very short time ago, but as 5G becomes more widespread smartphone users are going to expect they can do this and more. Micron Technology is doing its part to help satisfy those

Infineon takes system approach to automotive in-cabin monitoring

Infineon has released a new solution for automotive in-cabin monitoring systems that includes 60-GHz radar sensors, MCUs, and PMICs.Infineon Technologies AG has developed an in-cabin monitoring systems (ICMS) solution that includes 60-GHz radar sensors, m

Building a better battery with a novel physical design

Startup Addionics takes a different approach to battery design by focusing on physics instead of on chemistry.Climate change and greenhouse gas emissions, together with the need for renewable energies and a more sustainable future, are pushing the global

Σελίδα 1 / 17